48V 0.5A Wall Plug POE Injector Ethernet Adapter IP Phone Camera Power Supply US

Product Description:
48V-0.5A Wall Plug POE Injector Ethernet Adapter IP Phone/Camera Power Supply US

A perfect solution for applications where an electrical outlet may not be available, the injector adapter can be used to power PoE-enabled devices such as IP cameras or Wireless Access Points (WAPs). The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.

Applications:
IP Phone
Wireless Access Point and Client Devices
Security Camera Systems

Specifications:
Output 48V DC 500mA - Please do not order if your unit requires more than 500 MilliAmps
Input 100-240V 50/60HZ
Output 48V-0.5A
Input Current 1A
Efficiency 80% Min
Line / Load Regulation 3% / 5%
Ripple / Noise 200mV p-p
Turn-On Delay 2 Seconds Max
Rise Time 40 mS Max
Protections Auto Recover Over-Voltage, Short Circuit, Over-Current
Safety and EMC Standards UL 60950, CE
Environmental Standards RoHs
Operating Temperature -10 to 40C (14 to 104F)
Operating Humidity (RH) 5% - 90%
Storage Temperature -20 to 85C (-4 to 185F)
Network Connector Type RJ45 Shielded
POE Type Passive POE ( Pins 4,5 V , Pins 7,8 V-)

Technical Specifications:
Provides remote power to equipment through CAT 5 Ethernet cable up to 100M
Autoranging switching power supply 100~240V AC
Short circuit, over-current, and over-voltage protection
Reliable 24W passive POE output